Bambu PETG CF Filament 1KG - Titan Gray

QAR 115.00/ unit

You can order it now. We'll confirm the delivery date with you on WhatsApp after you order.

Delivery from QAR 50

Description

Reinforced with Carbon Fiber for Superior Strength PETG-CF combines the durability of PETG with the rigidity of carbon fiber, delivering exceptional mechanical performance for parts that need to work as hard as they look. Print Flawlessly with Minimal Tuning PETG-CF's specially formulated blend minimizes the risk of warping and nozzle sticking, addressing the clumping and stringing issues common to traditional PETG. The result is clean, consistent prints without extensive parameter fine-tuning. Sleek, Textured Finish Carbon fiber gives PETG-CF a distinctive texture that conceals layer lines, while its surface retains a glossy finish shinier than PLA-CF's matte look for prints that are as attractive as they are functional. Built for Performance Carbon fiber reinforcement significantly boosts the stiffness of standard PETG while enhancing both strength and toughness, making it an all-rounder among basic filaments. It's ideal for load-bearing and functional parts, drone components, racing models, and applications where impact strength and a sleek appearance both matter. Ready for Outdoor Use Thanks to its enhanced resistance to heat and moisture, Bambu PETG-CF is ideal for outdoor applications. Feel free to create durable tools for your garden or any outdoor environment. RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. Good to Know Before You Print PETG-CF is a carbon fiber filament, so it's abrasive, use a hardened steel nozzle (0.4mm, 0.6mm, or 0.8mm) rather than a stainless steel or 0.2mm nozzle to avoid excess wear. It's also moisture-sensitive and should be dried before use (65°C for 8 hours) and stored in a dry environment. Note: not compatible with AMS lite. Compatibility • AMS:  AMS, AMS 2 Pro, AMS HT (AMS lite not recommended) • Build plate : Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate • Hotend : Hardened Steel