Raspberry Pi M.2 HAT+ – NVMe SSD Expansion Board

QAR 49.00/ unit

You can order it now. We'll confirm the delivery date with you on WhatsApp after you order.

Delivery from QAR 50

Description

The Raspberry Pi M.2 HAT+ is an expansion board designed to connect M.2 peripherals such as NVMe SSDs and AI accelerators to the Raspberry Pi 5 via its PCIe 2.0 interface. It supports data transfer speeds of up to 500 MB/s and interfaces with the Raspberry Pi 5 through a single-lane PCI Express connection using a 16-pin, 0.5 mm pitch FPC connector. The board supports M.2 M-key devices in 2230 and 2242 form factors and can supply up to 3 A of power to connected peripherals. It conforms to the Raspberry Pi HAT+ specification and is automatically detected by current Raspberry Pi software and firmware. The board is supplied with a 16 mm stacking header and threaded spacers, allowing installation with the Raspberry Pi Active Cooler fitted. Features • PCIe 2.0 interface via Raspberry Pi 5 • Support for M.2 NVMe and PCIe peripherals • Data transfer rates up to 500 MB/s • M.2 M-key compatibility for 2230 and 2242 modules • Power delivery up to 3 A for connected devices • Compliance with Raspberry Pi HAT+ specification • Automatic detection by Raspberry Pi firmware • Mechanical support for Active Cooler installation Toutrials • Voltaat Learn -  Raspberry Pi 5 Tutorials • Voltaat Youtube Channel • How to Boot Raspberry Pi 5 off NVMe Drives with the M.2 HAT+