eSun Yellow ABS+ Filament - 1 KG - 1.75 mm

QAR 95.00/ unit

Description

With high toughness and high impact resistance, eSUN  ABS+ 3D printer material , can be used to print sturdy and durable parts.ABS plus is low VOC volatile content, low odor during printing, comfortable printing without pressure; ABS+ filament has low shrinkage, not easy to warp and crack during printing. Parameters Filament Properties Table 3D PRINTING FILAMENT ABS+ Density(g/cm 3 ) 1.06 Heat Distortion Temp(℃,0.45MPa) 73 Melt Flow Index(g/10min) 15(220℃/10kg） Tensile Strength(MPa) 40 Elongation at Break(%) 30 Flexural Strength(MPa) 68 Flexural Modulus(MPa) 1203 IZOD Impact Strength(kJ/㎡) 42 Durability 8/10 Printability 8/10 Recommended printing parameters Extruder Temperature(℃) 230 – 270℃ Recommended temperature：240℃ Bed temperature(℃) 95 – 110°C Fan Speed 0% Printing Speed 40 – 100mm/s Heated Bed Required Recommended Build Surfaces High temperature tape, PVP solid glue