Water Flow Sensor
QAR 19.00/ unit
Arrives by 17 October · Standard · Delivery from QAR 50
Express: 15 October · Economy: 21 October
1
Description
This simple flow sensor is very similar to its big brother, the YF-S201, but has been optimized for lower flow rates and features a higher pulse per liter count. Inside the housing, a small pinwheel with an attached magnet is spun by passing water; as the magnet makes each revolution, a hall effect sensor inside the housing outputs a pulse on the yellow wire. This sensor is best suited for flow rates between 0.3 and 6 liters per minute and outputs 5880 pulses per liter (approximately 1 pulse per 0.17mL). The sensor has a barbed 7mm connection point on each side with an inner diameter of 4mm.
Specifications
| Working Voltage | 5 to 12VDC |
|---|---|
| Max current draw | 15mA @ 5V |
| Working Flow Rate | 0.3 to 6 Liters/Minute |
| Working Temperature range | 1°C to 80°C |
| Maximum water pressure | 0.8 MPa |
| Output duty cycle | 50% +-10% |
| Output rise time | 0.04us |
| Output fall time | 0.18us |
| Durability | minimum 300,000 cycles |
| Pulses per Liter | 5880 |
- Category
- Sensors